Contact Us

Phone: 0086-13853398571 ( whatsapp or wechat )

TEL: 0086-533-2293766

FAX: 0086-533-2293765


Add: The South Of Nanjiaosong Village, Hutian Town, Zhangdian District, Zibo City, Shandong, China

Home > Knowledge > Content
Masterbatch for Plastic Sheet Extrusion Jan 16, 2017
  • Model NO.: Masterbatch for Plastic Sheet Extrusion

  • Usage: General Plastics, Engineering Plastics, Specialty Plastics, Blow Film

  • Plastic Forming Method: Extrusion

  • Filler: Talc

  • Carrier Resin: PE

  • Adding Ratio: 5-50%

  • Mfi: 2-6

  • Material: Powder and Plastic

  • Plastic Properties After Heated: Thermoplastic Plastics

  • Color: White

  • Filler Mesh: 1500

  • Density (g/cm3): 1.6-1.7

  • Filler Content: 80%

Masterbatch for Plastic Sheet Extrusion advantages:
1.The oil absorption of the powder  value is low,  with good fluidity and dispersion, so its the good surface finish of the products.
2. Light Specific grativity, high transparent and brightness, the refractive index close to the PP,PE
3. The high adding ratio is more than 50%.
4. Good dispersion, donnot separate out.
5. Good heat sealing properties, high tensile strength
6. Improve the impact resistance, thermal conductivity and abrasive resistance of the product. Reduce the heat shrinkable property,  improve the strength and toughness of the product.
7. Improve the strength and geometric stability of the product, avoid or reduce the shrinkage of injection molding

Product Data:
NameMasterbatch for Plastic Sheet Extrusion
Surface ColorWhite
Filler Mesh No.1500
Filler Content85%
Carrier ResinPE
MFI (g/10min)2-6
Density (g/cm3)1.6-1.7
Melt Temperature160
Adding ratio5-50%
ApplicationFilm blowing, Injection molding, Blister etc.
Packing25KG compound woven bags, or customized
StorageKeep the products in a dry, ventilated place, Note to avoid moisture, insolation, rain and breakage in transportation.