• 0086-13853398571
  • [[ImgSrc-moreshare]]

Contact Us

Phone: 0086-13853398571 ( whatsapp or wechat )

TEL/FAX: 0086-533-2293766

E-mail: sales@zbholy.com

Add: Eastern Chemical Zone of Zibo City, Shandong, China

Home > Knowledge > Content
Plastic PP color masterbatch for film blowing Jul 30, 2017

Plastic PP color masterbatch for film blowing

PP Masterbatch Basic Info:

  • Color: Customeizd

  • Application: PP Blowing Film, Drawing, Injection etc.

  • Specific Gravity: 0.95~1.14

  • Specification: 20%-70% Pigment Content

  • Carrier: PP

  • Melt Mass-Flow Rate(Mfr):  <15 G/10min (190 C/10.0kg)

  • Moisture Content: <0.15 %


Plastic Masterbatch Technical Data:

ITEMSNominal Value  Unit
Specific Gravity 0.95~1.14
Melt Mass-Flow Rate(MFR)(190C/10.0kg)<15 g/10min
Pigment Content20-70 %
Moisture Content<0.15 %
Standard ReferencePantone
Grain Diameter(mm)2.5-2.8
Production Temperature150-180C
Add Ratio2%-5%


Applications of color masterbatch:
1. PE/PP Injection Molding (Box, Containers, Chairs, Crates, Buckets, Battery, cases, Hangers, etc.)
2. PE/PP Extrusion Molding (Sheet, Pipe, Wire & Cable, etc.)
3. PE Blow Molding (Medical & Cosmetic container, Lubricant & Paint container, etc)
4. PE Film (shopping bags, casting film, multilayer film, etc.)
5. PE Fiber (Carpet, Textiles, Upholstery, etc.)

FAQ: 
1. How to use masterbatch?
A: just mix up with the resin granules according to the dosage ratio under appropriate temperature.
2.  How long the masterbatch could be stored?
 A : If stored under a dry and cool environment, the quality of masterbatches will not change even after a long period of store, for the pigments fixed on the carrier resin which stay in a closed state. 
3.  Does the masterbatch need to be dried before use?
A : In general it can be used directly except ABS and some expecial masterbatches mentioned, which should be dried according to common method.
4.  Does the masterbatches influence the property of products?
 A : Some pigments have effect on flame resistance. It should be mentioned as first if is used for flame resistance products. 
5.  Does the mould have an effect on masterbatches?
 A : If ask for a smooth surface, Good quality mould is needed.
6.  Will the color of masterbatches fade?
 A : Absolutely not.