• 0086-13853398571

Contact Us

Phone: 0086-13853398571 ( whatsapp or wechat )

TEL/FAX: 0086-533-2293766

E-mail: sales@zbholy.com

Add: Eastern Chemical Zone of Zibo City, Shandong, China

Home > News > Content
Hot Sales White Plastic Masterbatch for Bag Feb 21, 2017
  • Model NO.: Hot Sales White Plastic Masterbatch for Bag

  • Usage: General Plastics

  • Plastic Forming Method: Extrusion

  • Pigment Content: 30%

  • Particle Size: Less Than 48 Micrometre

  • Carrier: PE

  • Specification: Diameter 2.5mm

  • Plastic Properties After Heated: Thermoplastic Plastics

  • Color: White

  • Compatibility: PE/PP

  • Moisture Content: Less Than 0.15%

  • Density: 1.2g/Cubic Centimeter

  • Weather/Light/Color Fastness: Level 7 to 8


White Plastic Masterbatch Specifications:
Model NoHot Sales White Plastic Masterbatch for Bag
MaterialPE
UsageGeneral Plastics,Engineering plastics,specialy plastics
Plastic forming methodExtrusion
Plastic properties after heatedThermoplastic plastics
Color White
Pigment content30%
Moisture contentLess then 0.15%
Granule diameter2.5mm
Particle sizeless than 48 micrometre
Density1.5-2.0g/Cubic Centimeter
MFI(G/10min)less than 48 micrometre

White Plastic Masterbatch Advantages:

1. High concentration of pigment 
2. Excellent dispersion, good heat-resistant, high color fastness, stable performance and shows bright color
3. Non-toxic, environmental-friendly
4. Compatible with various material PE/HDPE/LDPE/PP/PVC/EVA
5. Wide application: blow moulding, blowing film, injection moulding, extrusion, spin-dyeing, cable sheathing, etc.
6. Range of industrial application: office automation, household appliances, film and packing material, textile, sheet, pipe, medical appliances, toys and so on.
 
FAQ: 
Q1. How to use masterbatch?
A: just mix up with the resin granules according to the dosage ratio under appropriate temperature.
Q2.  How long the masterbatch could be stored?
 A : If stored under a dry and cool environment, the quality of masterbatches will not change even after a long period of store, for the pigments fixed on the carrier resin which stay in a closed state. 
Q3.  Does the masterbatch need to be dried before use?
A : In general it can be used directly except ABS and some expecial masterbatches mentioned, which should be dried according to common method.
Q4.  Does the masterbatches influence the property of products?
 A : Some pigments have effect on flame resistance. It should be mentioned as first if is used for flame resistance products. 
Q5.  Does the mould have an effect on masterbatches?
 A : If ask for a smooth surface, Good quality mould is needed.